Bathtub faucet classification

  There are two types of bathtub faucets. One is a shower type shower faucet. This type is installed above the shower room. It is usually mixed with hot and cold mixing control functions. It is divided into wall-mounted shower head and hose type according to the form. Sprinkle, the basic use of the family is a hose shower, so you can always take it in your hand. The public baths are selected according to the situation, most of them are wall-mounted showers, which protect the faucet. Some high-end shower faucets also have thermostatic control.

  The other is the bathtub faucet, which is installed on one side of the bathtub. There are also hot and cold mixing control switches. Most of the materials are ceramic valve cores. The faucet valve body is generally made of brass. This type can prevent leakage and wear.

  How high is the height of the bathtub faucet?

  The suitability of the bathtub faucet is directly related to the user's ease of use and comfort. The bathtub is installed with a freestanding bathtub and an on-board bathtub. When the freestanding bathtub is placed against the wall, the wall can be fitted with a concealed bathtub faucet. When placed independently, it is usually equipped with a floor bath faucet. The width of the bathtub on the table is 900mm, the bottom of the bathtub is 100mm from the ground, the height of the bathtub is 550mm, and the height of the bathtub faucet is 750~850mm (concealed). This will ensure a comfortable experience when bathing.

  The mixing valve depends on the height of the bathtub. It should be 20-30 cm higher than the bathtub. It is too high to splash water, and the hose is too low. The height of the bathtub is generally 600mm, so the height of the wall-mounted faucet is 80-90 company (with the completion of the ground). The distance of the drainage pit should be as long as it is in the area below the bath.

  Bathtub faucet installation

  The installation method of the bathtub faucet is not difficult. Generally, after purchasing the faucet, if the faucet is to be installed in the wall, the sluice valve core is first installed in the wall, pay attention to the thickness of the bathroom wall, if the wall is too thin, do not install the wall. in. When you are pre-buried in the wall, do not remove the protective cover from the outside to prevent the cement and other debris from damaging the valve core. Pay attention to the direction of the valve core and do not reverse the installation.

  In addition, when installing, pay attention to the separate installation of hot and cold water into the water pipe, do not reverse it. If the pipe size is not suitable when installing the faucet, the method of adjusting the kidnapper can be used for correction.

  Be careful not to use too much force when using the faucet. The material of the faucet is alloy or other ceramics. It is brittle and light, so as not to deform the faucet, causing water leakage or even damage. To choose a faucet, you must also choose a brand business, so that the quality is guaranteed and there is after-sales service.